Frequently Asked Questions (Faqs) - Ottobock KISS Kurzanleitung

Frequently Asked Questions (FAQs)

Which liner do I need for the KISS Lanyard System?
You need a pin­locking liner with an exterior textile.
We recommend using the 6Y80 TF Adapt Liner.
Do I need any accessories to fabricate a KISS socket?
You only need the KISS Lamination Kit 4R161 for fabricating
the 4R160=2 socket. This lamination kit is reusable. If a sock
is used over the liner – holes will need to be made for the
proximal and distal straps. We recommend using the Anti­
Fray Iron­Ons 4X225 to avoid sock fraying.
How are the two included straps connected to the
liner?
The distal strap is screwed into the pin nut of the liner and
the proximal strap is connected to the liner with the Velcro
placard.
16 Ottobock | K ISS Lanyard System