Safety Alert Messages-Cylinder And Processing Hazards (Document Biuuus13); Safety Alert Messages-Unsafe Conditions; Damage And Malfunction Hazards; Hazards Resulting From Inoperative Safety Devices - Milnor M7V4836 Serie Handbuch

Safety Alert Messages—Cylinder and Processing Hazards
2.1.4.
[Document BIUUUS13]
The following are instructions about hazards related to the cylinder and laundering process.
DANGER 6 : Entangle and Sever Hazards—Contact with goods being processed can
cause the goods to wrap around your body or limbs and dismember you.
• Do not attempt to open the door or reach into the cylinder until the cylinder is stopped.
• Do not touch goods inside or hanging partially outside the turning cylinder.
• Know the location of all emergency stop switches, pull cords, and/or kick plates and use
them in an emergency to stop machine motion.
• Know the location of the main machine disconnect and use it in an emergency to remove
all electric power from the machine.
WARNING 7 : Crush Hazards—Contact with the turning cylinder can crush your limbs.
The cylinder will repel any object you try to stop it with, possibly causing the object to strike or
stab you.
• Lock out and tag out power at the main machine disconnect before reaching into the
cylinder.
• Do not place any object in the turning cylinder.
WARNING 8 : Confined Space Hazards—Confinement in the cylinder can kill or injure
you. Hazards include but are not limited to panic, burns, poisoning, suffocation, heat prostration,
biological contamination, electrocution, and crushing.
• Do not attempt unauthorized servicing, repairs, or modification.
WARNING 9 : Explosion and Fire Hazards—Flammable substances can explode or
ignite in the cylinder, drain trough, or sewer. The machine is designed for washing with water,
not any other solvent. Processing can cause solvent-containing goods to give off flammable
vapors.
• Do not use flammable solvents in processing.
Safety Alert Messages—Unsafe Conditions
2.1.5.

Damage and Malfunction Hazards

2.1.5.1.

Hazards Resulting from Inoperative Safety Devices

2.1.5.1.
1.
WARNING 10 : Multiple Hazards—Operating the machine with an inoperative safety
device can kill or injure personnel, damage or destroy the machine, damage property, and/or void
the warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
WARNING 11 : Electrocution and Electrical Burn Hazards—Electric box
doors—Operating the machine with any electric box door unlocked can expose high voltage
conductors inside the box.
• Do not unlock or open electric box doors.
[Document BIUUUS14]
14
Chapter 2. Safety
PELLERIN MILNOR CORPORATION