Safety Alert Messages-Internal Electrical And Mechanical Hazards (Document Biuuus11); Safety Alert Messages-External Mechanical Hazards - Milnor M7V4836 Serie Handbuch

Chapter 2. Safety
Safety Alert Messages—Internal Electrical and Mechanical
2.1.2.
Hazards
[Document BIUUUS11]
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING 1 : Electrocution and Electrical Burn Hazards—Contact with electric
power can kill or seriously injure you. Electric power is present inside the cabinetry unless the
main machine power disconnect is off.
• Do not unlock or open electric box doors.
• Do not remove guards, covers, or panels.
• Do not reach into the machine housing or frame.
• Keep yourself and others off of machine.
• Know the location of the main machine disconnect and use it in an emergency to remove
all electric power from the machine.
WARNING 2 : Entangle and Crush Hazards—Contact with moving components
normally isolated by guards, covers, and panels, can entangle and crush your limbs. These
components move automatically.
• Do not remove guards, covers, or panels.
• Do not reach into the machine housing or frame.
• Keep yourself and others off of machine.
• Know the location of all emergency stop switches, pull cords, and/or kick plates and use
them in an emergency to stop machine motion.
WARNING 3 : Crush Hazards—Tilting machines only—The machine housing will crush
your body or limbs if it descends or falls while you are under it. Housing can descend with power
off or on. Manual operation of tilting valves overrides safety interlocks. Improper operation of
manual tilting valves may cause the housing to descend.
• Do not remove guards, covers, or panels.
• Do not reach into the machine housing or frame.
Safety Alert Messages—External Mechanical Hazards
2.1.3.
BIUUUS12]
The following are instructions about hazards around the front, sides, rear or top of the machine.
WARNING 4 : Crush Hazards—Suspended machines only—Spaces between the shell and
housing can close and crush or pinch your limbs. The shell moves within the housing during
operation.
• Do not reach into the machine housing or frame.
• Keep yourself and others clear of movement areas and paths.
WARNING 5 : Fall, Entangle, and Strike Hazards—Machine motion can cause you to
fall or become entangled in or struck by nearby objects if you stand, walk, or ride on the machine.
Shuttles and conveyor belts move automatically.
• Keep yourself and others off of machine.
PELLERIN MILNOR CORPORATION
13
[Document