Kaisai KWX HRBI Serie Bedienungsanleitung Seite 82

How To Use The Advanced Functions
Mode
Timer Timer
LED
Turbo
ond
SHORTCUT function
Used to restore the current settings or
resume previous settings.
Push this button when remote controller
is on, the system will automatically revert
back to the previous settings including
rk
operating mode, setting temperature, fan
ature
speed level and sleep feature (if activated).
If pushing more than 2 seconds, the
OOL
system will automatically restore the
current operation settings including
e
operating mode, setting temperature,
fan speed level and sleep feature
EAT
(if activated ).
ments,
Hold down Fan
button for 2
seconds to activate
Silence function
ON/OFF Fan
Press this button
Swing
Sleep
twice in one second
to activate 8 C
Follow
Direct
me
heating function
Self
Short
clean
cut
Silence function
Hold down Fan speed button for 2 seconds
to activate/cancel Silent mode. Due to low
frequency operation of compressor, it may
result in insufficient cooling and heating
capacity. (Applicable to the air conditioner
with Silent feature only)
8 C Heating Function O
When the air conditioner operates
under heating mode with the set
temperature of 17 C, press Temp
button twice in one second will
activate 8 Degree heating function.
O
The unit will operate at a setting
temperature of 8 C. The indoor
unit display shows
Self clean function
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the self clean feature is activated,
your unit will clean itself automatically. After
cleaning, unit will turn off automatically.
You can use self clean feature as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
14
82
, , ,,
O
O
, , ,,
FP .