HP SA1100 Schnellstartanleitung Seite 14

All manuals and user guides at all-guides.com
To assign a subnet mask
1. After entering an IP address, advance to the Set Network
Mask menu. Enter the subnet mask by selecting a number
for each zero in each octet:
000.000.000.000 x
2. For each zero in each octet, use the up button to change
the value from 0 to 1, 2, 3, and so on. You can't set an octet
outside the maximum value (255) or the minimum value
(000).
3. To move the cursor from one zero to another zero, use the
right or left buttons. If the cursor is in the square space,
pushing the down button advances you to the next
screen, while the up button moves you to the previous
screen.
To set a default gateway
1. After entering the subnet mask, advance to the Set
Default Gateway menu. Enter the default gateway by
selecting a number for each zero in each octet:
000.000.000.000 x
2. For each zero in each octet, use the up button to change
the value from 0 to 1, 2, 3, and so on. You can't set an octet
outside the maximum value (255) or the minimum value
(000).
3. To move the cursor from one zero to another zero, use the
right or left buttons. If the cursor is in the square space,
pushing the down button advances you to the next
screen, while the up button moves you to the previous
screen.
10