Check List: In Case Problems Occur - Reinecker MANO M Gebrauchsanweisung

Check list: In case problems occur

Problem
MANO M does not switch
ON .
MANO M is switched ON but
no picture is displayed .
Autofocus does not work .
The picture on the display is
too dark or too bright .
Reduced output of battery .
56
Solution
• Make sure that the battery is completely
charged . Charge the battery at least for
2,0 hours .
• It is possible that the Freeze button has
been pressed . Press the Freeze button
once again in order to deactivate the
function .
• It is possible that the Power Saving Mode
has been activated . Press any button or
move the device and the MANO M will
return to normal operation .
• It is possible that the Manual Focus Mode
is activated . The MANO M only focuses
when the Focus button is pressed . Change
to the Autofocus Mode by holding the Focus
button pressed and pushing the Color Mode
button .
• Dust may have come to the camera lens .
Clean the lens with the enclosed screen
cleaning cloth .
• Change the brightness level by pressing
the Zoom up button while holding the Freeze
button . The current brightness level is briefly
displayed by an icon .
• The repeated charging and discharging of
the battery may reduce the battery capacity .
This may lead to a reduced operating time
for the MANO M .