Turning beep tones ON/OFF
By default the beep tone is activated but it may be turned OFF .
If you want to turn OFF the beep, keep pressing the freeze frame but-
ton "F" while pressing the color mode button "M" . The current status of
the "beep" will be displayed shortly on the screen . To return to the beep
mode again, just repeat this action .
Reset MANO M to factory settings
To return to factory settings, make sure that MANO M is turned OFF .
Then keep the Focus button "F" pressed, while pushing the ON/OFF slide
bar to the right . RESET will appear on the screen . MANO M has been set
to default .
Note: All saved pictures will be deleted, when setting MANO M to default!
Beep
Tone ON
Beep
Tone OFF
55