Troubleshooting - elero MultiTel 2 867 MHz Bedienungsanleitung

6
MultiTel2_BA_182030001_DE+EN_0514.indb 43 ultiTel2_BA_182030001_DE+EN_0514.indb 43
Downloaded from www.Manualslib.com

Troubleshooting

Fault
Drive does
not run; status
display does
not light up
Drive does
not run; status
display lights up
red or fl ashes
orange
Desired drive
does not run
End positions
are approached
inaccurately
Drive operates
in the wrong
direction
Tab. 12 Troubleshooting the MultiTel 2
manuals search engine
Cause
Batteries are low
Batteries are
incorrectly
installed
1. The receiver
is outside of
sending range
2. Receiver out of
order or faulty
3. Receiver
not yet
programmed
Incorrect group
or channel
selected
End positions
not yet set
Directions
are incorrectly
allocated
Ⓒ elero GmbH
Remedy
Insert new
batteries
Insert batteries
correctly
1. Reduce
distance to
the receiver
2. Switch on or
exchange
receiver
3. Program
receiver
Select correct
group or channel
Have the end
positions set
by a trained
specialist in
accordance
with the product
instructions
Delete
transmitter and
reprogram
EN | 43
07.01.2015 13:03:27 07.01.2015 13:03:27