Intermediate Position - elero MultiTel 2 867 MHz Bedienungsanleitung

30 | EN
MultiTel2_BA_182030001_DE+EN_0514.indb 30 ultiTel2_BA_182030001_DE+EN_0514.indb 30
Downloaded from www.Manualslib.com
Important:
The customised product views will be lost and must be
redefi ned if the device is reset to the factory settings.

Intermediate position

You can set a runtime from zero to 360 seconds for
approaching an intermediate position from the top end
position if the radio receiver product (roller shutter, venetian
blind, awning) does not support saving an independent
intermediate position.
The runtime can be set in 1-second steps by time
preselection by joystick or intuitively with the DOWN or UP
key with travel distance setting; the factory setting for the
intermediate position runtime is zero seconds (no runtime
setting).
• "Save" menu key
The intermediate position is approached by the defi ned
runtime by double-clicking the DOWN key.
Ventilation/tilting position
You can set a runtime in 0.1-second steps for approaching
a ventilation position (roller shutter) or tilting position
(venetian blind) from the bottom end position if the radio
receiver product does not support saving an independent
intermediate position.
The runtime can be set in 0.1-second steps by time
preselection by joystick or intuitively with the DOWN or UP
key with travel distance setting; the factory setting for the
ventilation position runtime is zero seconds (no runtime
setting).
• "Save" menu key
manuals search engine
Ⓒ elero GmbH
07.01.2015 13:03:23 07.01.2015 13:03:23