Selection Button - elero MultiTel 2 867 MHz Bedienungsanleitung

4.4.5 Selection button

24 | EN
MultiTel2_BA_182030001_DE+EN_0514.indb 24 ultiTel2_BA_182030001_DE+EN_0514.indb 24
Downloaded from www.Manualslib.com
Press the selection key briefl y to query the current
automatic status and the receiver position of the
programmed receiver and to update on the hand-held
transmitter.
After pressing the key briefl y, all channels, including
channels that have not been programmed yet, can be
selected with the joystick for 30 seconds; after 30 seconds
only the programmed channels are visible.
Press the selection key for a longer time (longer than
1 second) to switch the operating mode of the channel
(between "Auto" and "Manual").
"Manual" operating mode:
The operating mode indicator lights up red and the
operating mode in the display switches between "manual"
and "automatic".
• The receiver now carries out manual travel commands
only and does not respond to automatic travel
commands.
Important:
All automatic functions are disabled in the receivers, the
receiver does not respond to automatic timer commands
and shading commands from programmed sensors.
Exception:
Alarm movements are a result of reported alarms of
corresponding sensors (e.g. wind and rain sensors) are still
executed.
manuals search engine
Ⓒ elero GmbH
07.01.2015 13:03:22 07.01.2015 13:03:22