Deleting Positions/Deleting Transmitters; Expert Settings - elero MultiTel 2 867 MHz Bedienungsanleitung

4.6.8 Deleting positions/deleting transmitters

4.6.9 Expert settings

40 | EN
MultiTel2_BA_182030001_DE+EN_0514.indb 40 ultiTel2_BA_182030001_DE+EN_0514.indb 40
Downloaded from www.Manualslib.com
Deleting the intermediate position in the receiver
1. Press both the STOP button and the DOWN button.
2. Press and hold this key combination for approx.
3 seconds. The status display lights up briefl y.
Deleting the ventilation/tilting position in the receiver
1. Press both the STOP button and the UP button.
2. Press and hold this key combination for approx.
3 seconds. The status display lights up briefl y.
Deleting the transmitter channel in the receiver
• Press both the STOP key and the programming button P
(back of the device).
3. Press and hold this key combination for approx.
6 seconds until the status display lights up briefl y orange
and then red.
The channel (or the group) in the transmitter is also
deleted.
Deleting all the transmitters in the receiver
1. Press the STOP key, the programming button P (back of
the device) and the UP key and the DOWN key together.
2. Press and hold this key combination for approx.
6 seconds. The status display lights up orange-green
briefl y twice, followed by red.
The channel (or the group) in the transmitter is also
deleted.
DIP switch 1 on the back of the device, under the cover:
OEM setting
manuals search engine
Ⓒ elero GmbH
07.01.2015 13:03:26 07.01.2015 13:03:26