Notes On Troubleshooting - elero TempoTel 282670001 Bedienungsanleitung

Notes on troubleshooting

Fault
Drive does not run;
status display does
not light up
Drive does not run;
status display
lights up red or
flashes orange
Unidirectional:
Status display
lights up green
Drive operates in
the wrong direction
Desired drive does
not run
End positions are
approached
inaccurately
The hand-held
transmitter does
not carry out the
set switching
commands.
The hand-held
transmitter does
not carry out the
set switching
commands
accurately.
GB-26
Cause
1. Batteries are low
2. Batteries are
incorrectly installed
1. The receiver is
outside of sending
range.
2. Receiver out of
order or faulty
3. Receiver not yet
programmed
Directions are
incorrectly allocated
Wrong group
selected
End positions not
yet set
1. The date and
time are not set
2. MANUAL
operating mode is
set
3. The timed
switching functions
for specific
channels are not
activated
Holiday function is
switched on
www.elero.com
Remedy
1. Replace
batteries
2. Insert batteries
correctly
1. Reduce
distance to the
receiver
2. Switch on or
exchange receiver
3. Program
receiver
Delete transmitter
and reprogram
Select the right
group
Have the end
positions set by a
trained specialist in
accordance with
the product
instructions
1. Setting the date
and time
2. Set "AUTO"
operating mode.
3. Activate the
timed switching
function for the
channel.
Switch holiday
function off