elero MultiTel 2 867 MHz Bedienungsanleitung Seite 74

26 | EN
MultiTel2_BA_182030001_DE+EN_0514.indb 26 ultiTel2_BA_182030001_DE+EN_0514.indb 26
Downloaded from www.Manualslib.com
Entering text: To enter text (e.g. for naming groups and
channels), you can use the text input to select upper and
lower case, numeric characters, special characters and
accented characters. The selected character set is visually
supported by highlighting the allocated icons in the display.
Dialogue guidance in the display is menu-guided.
All functions can be accessed via the various menus.
See diagram below for a view of the complete menu
structure:
MultiTel 2 menu structure
Administration Channels
Groups
All
Reset
Settings
Language
Lighting
Channels
Groups
All
Function
Factory setting
Expert
Version
Fig. 4 Menu structure of the MultiTel 2
manuals search engine
Channel-related allocations (text field 1, text field 2, groups)
Group selection for channel allocation and text input
(text field 1, text field 2, channels)
Text input (text field 1, text field 2)
on availability >/= 1 channel
Resets all group allocations and text fields
Selection of language
Backlighting of display
}
Product selection
Intermediate position or
intermediate position 1
(in seconds)
Ventilation /tilting position or
intermediate position 2 or
fabric tautening position (in 0,1 s)
Reset all settings to factory settings
(texts, groups, language;
channel settings without channel allocation change)
Alle On / Off
INFO On / Off
Information on the software version
Ⓒ elero GmbH
Product-related transmitter configuration of
individual channels by runtime, transmission mode,
product pictogramm (channels only)
Setting travel to intermediate position
(factory setting: no runtime)
Setting travel time to
desired postition
(factory setting: no runtime)
Enabele or disable option for selecting
master channel (all individual channels)
Enable or disable periodic query
for position reports during travel
in groups and in master channel
07.01.2015 13:03:22 07.01.2015 13:03:22