Product Selection - elero TempoTel 282670001 Bedienungsanleitung

Product selection

Once you have selected a channel, you can then allocate a function
specific to a product group to it.
Roller
shutters/
interior
shading/
awnings
Venetian
blind
Intermediate position or Intermediate position1
The transmitter can store a run time for the intermediate position for
each channel. A common run time for the intermediate position can
be set for unidirectional channels.
Once you have selected a channel, you can set a run time for
approaching an intermediate position from the top end position in 1-
second steps.
Approaching the intermediate position (according to the set run
time): touch the DOWN button briefly twice.
The intermediate position run time is set at 0 (---) at the factory.
Ventilation position, tilting position, fabric tensioning
position, intermediate position 2
The transmitter can store one run time for this position for each
channel. A common run time can be set for unidirectional channels.
Once you have selected a channel, you can set one run time for
approaching a ventilation position (roller shutters) or tilting position
(venetian blinds) from the bottom end position in 0.1-second steps.
Approaching the ventilation or tilting position (according to the set
run time): touch the UP button briefly twice.
The ventilation position run time is set at 0 (---) at the factory.
GB-18
Any transmitted command activates the receiver
immediately, which then switches off in the end
position.
Any transmitted command activates the receiver
immediately.
Releasing the UP or DOWN button within
2 seconds stops the blind immediately.
Pressing the UP or DOWN button for longer than
2 seconds brings the blind to its end position.
www.elero.com