Dmx Controlled Operation - EuroLite AKKU IP PAR 14 HCL QuickDMX Bedienungsanleitung

DMX controlled operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 12 control channels.
However, it can also be switched to a mode with 2, 3, 6-1, or 6-2 channels if different functions are required.
Tobe able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until DMX is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 2 CH (2 DMX channels), 3 CH (3 DMX channels), 6-1 CH (6-1 DMX channels), 6-2
CH (6-2 DMX channels) or 12 CH (12 DMX channels). Use the buttons UP and DOWN to select the
desired number of DMX channels. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address ADDR:***. Use the buttons UP and
DOWN to set the address. Confirm with the ENTER button.
4 When receiving DMX control signals, the display shows DMX. If no DMX control signals are available,
the display shows NO SIGNAL.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
2-channel mode
Channel
1
Master dimmer
2
Preset colors
3-channel mode
Channel
1
2
3
Value Function
000 – 255 Total brightness 0-100 %
000 – 009 No function
010 – 019 Red
020 – 029 Green
030 – 039 Blue
040 – 049 White
050 – 059 Amber
060 – 069 UV
070 – 079 Yellow
080 – 089 Magenta
090 – 099 Cyan
100 – 109 Dark orange
110 – 119 Green yellow
120 – 129 Salmon
130 – 139 Turquoise
140 – 149 Light green
150 – 159 Orange
160 – 169 Straw
170 – 179 Lavender
180 – 189 Light blue
190 – 199 Dark blue
200 – 209 Pink
210 – 255 Full on
Value Function
000 – 255 Red 0-100%
000 – 255 Green 0-100%
000 – 255 Blue 0-100%
34/40 00128658, Version 1.0