Technical Data - EINHELL TE-HP 140 Originalbetriebsanleitung

ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
This equipment is not allowed to be used by
children. Children should be supervised so that
they do not play with the equipment. Children are
not allowed to carry out the cleaning or mainte-
nance. This equipment is not allowed to be used
by people with limited physical, sensory or mental
capacities or by those with insuffi cient knowledge
or experience unless they are supervised or inst-
ructed by a person who is responsible for them.

4. Technical data

Rated voltage: ........................ 220-240 V ~ 50 Hz
Power consumption: ................................ 1900 W
Rated pressure: ...................... 10 MPa (100 bar)*
Permissible pressure: ...... max. 14 MPa (140 bar)
Rated fl ow rate: ......................................5.8 l/min
Max. water inlet pressure: ...........0.7 MPa (7 bar)
Protection class: ...........................................II /
Weight: ....................................... approx. 11.3 kg
* The rated pressure depends on the accessories
used with the pressure washer.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60335-2-79.
L sound pressure level ........................ 79 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 93 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-2-79.
Anl_TE_HP_140_SPK9.indb 20 Anl_TE_HP_140_SPK9.indb 20
GB
Vibration emission value a
K uncertainty = 0.7 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 20 -
≤ 2.5 m/s
2
h
2
12.05.2020 13:21:36 12.05.2020 13:21:36