Technical Data - EINHELL 41.407.70 Originalbetriebsanleitung

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
This equipment is not allowed to be used by
children. Children should be supervised so that
they do not play with the equipment. Children are
not allowed to carry out the cleaning or mainte-
nance. This equipment is not allowed to be used
by people with limited physical, sensory or mental
capacities or by those with insu cient knowledge
or experience unless they are supervised or inst-
ructed by a person who is responsible for them.

4. Technical data

Rated voltage: ........................ 220-240 V ~ 50 Hz
Power consumption: ................................ 2300 W
Rated pressure: ...................... 12 MPa (120 bar)*
Permissible pressure: ...... max. 17 MPa (170 bar)
Rated ow rate: .........................................6 l/min
Max. water inlet pressure: ...........0.7 MPa (7 bar)
Protection class: ...........................................II /
Weight: ....................................... approx. 11.7 kg
* The rated pressure depends on the accessories
used with the pressure washer.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60335-2-79.
L sound pressure level ........................ 82 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 96 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Anl_TE_HP_170_SPK9.indb 20 Anl_TE_HP_170_SPK9.indb 20
GB
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-2-79.
Vibration emission value a
K uncertainty = 0.7 m/s
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 20 -
2.5 m/s
2
h
2
30.04.2020 09:50:27 30.04.2020 09:50:27