Cleaning And Maintenance - Philips GC4880 Serie Bedienungsanleitung

Safety auto-off (specific types only)
The safety auto-off function automatically switches off the iron
if it has not been used for 30 seconds resting on its soleplate
or 8 minutes resting on its backplate. The auto-off light will
light up.
- To let the iron heat up again, pick up the iron or move it
slightly. The auto-off light goes out.

Cleaning and maintenance

Cleaning
1 Unplug the iron and let it cool down.
2 Pour any remaining water out of the water tank from the
water filling door.
3 Wipe flakes and any other deposit off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal
objects. Never use a scouring pad, vinegar or other chemicals
to clean the soleplate.
Quick Calc Release
IMPORTANT: To prolong the life time of your appliance and
to maintain good steaming performance, use Quick Calc
Release function once
If water in your area is very hard, use this function more
frequently.
Note: Make sure that the iron has been unplugged for at
least 1 hour and has completely cooled down, before you use
Quick Calc Release.
1
Put the iron on a levelled surface and push up the Quick
Calc Release lock at the back of the iron.
2 Take out the Quick Calc Release tray.
3 Pour out scales in the tray into a sink or dustbin. Clean the
tray using tap water. Remove any excess water from the
tray.
every 1 month.
ENGLISH
9