Philips GC4880 Serie Bedienungsanleitung Seite 9

Problem Possible cause
The steam boost You have used
function does the steam boost
not work properly function too often
(water leaks out of within a very short
the soleplate). period.
You have used
the steam boost
function at a too low
temperature.
Flakes and Scales are formed
impurities inside the soleplate.
come out of the
soleplate during
ironing.
Water leaks from You have overfilled
the water filling the water tank.
door.
Water or steam You have not
leaks from the locked the Quick
back part of the Calc release tray
iron. properly.
The Quick Calc
release tray is
damaged.
Storage
1 Unplug the iron and empty the water tank. Let it cool
down in a safe place.
2 Wind the mains cord around the backplate of the iron and
store it on its heel.
Troubleshooting
This chapter summarises the most common problems you
could encounter with the appliance. If you are unable to solve
the problem with the information below, visit www.philips.com/
support for a list of frequently asked questions or contact the
Consumer Care Centre in your country (see the worldwide
guarantee leaflet for contact details).
Solution
Wait for a few seconds before you use the
steam boost function again.
Set an ironing temperature at which the
steam boost function can be used (●●● to
MAX).
Use the Calc-clean function (see chapter
'Cleaning and maintenance', section 'Calc-
clean function').
Do not fill the water tank beyond the MAX
indication. Pour excess water out of the
water tank.
Take out the Quick Calc Release tray and
clean it using tap water. Use a piece of
cloth to wipe off scales in the opening of
the back part of the iron. Put back the tray
and lock it. (See chapter 'Cleaning and
maintenance', section 'Quick calc release
function').
Contact a consumer care center in your
country (see the world wide guarantee
leaflet for contact details).
ENGLISH
11