Ironing Tips; Safety Auto-Off Mode; Cleaning And Maintenance - Philips GC9642/60 Gebrauchsanleitung

Ironing tips

Minimising wrinkles while drying
Start wrinkle removal early in the drying process by spreading
out your laundry properly after washing and by putting
garments on hangers to make them dry naturally with fewer
wrinkles.
Best practice shirt ironing
Start with the time-consuming parts like collar, cuff links and
sleeves. Next, iron the bigger parts like front and back to prevent
wrinkling the bigger parts when you are busy ironing the time-
consuming parts.
Collar: When you iron a collar, start on its underside and work
from the outside (the pointy end) inwards. Turn over and repeat.
Fold down the collar and press the edge for a more crisp finish.
Buttons: Iron on the reverse side of the buttons for more
effective and faster ironing.

Safety auto-off mode

- To save energy, the appliance switches off automatically when
it has not been used for 10 minutes. The blue auto-off light in
the on/off button starts to flash.
- To activate the appliance again, press the on/off button. The
appliance then starts to heat up again.
Note: The appliance is not switched off completely when it is
in auto-off mode. To switch off the appliance, press the on/off
button.

Cleaning and maintenance

To properly maintain your appliance, clean it regularly.
1 Clean the appliance with a moist cloth. To remove
stubborn stains, you can use a small amount of washing-
up liquid.
2 To easily and effectively remove stains from the soleplate,
switch on the appliance and let it heat up. When the
appliance has heated up, move the iron over a moist cloth
while you press the steam trigger.
Tip: Clean the soleplate regularly to ensure smooth gliding.
ENGLISH
15