Optional Equipment - Motorola PMPN4308 Schnellstartanleitung

Table 9: Other Motorola Solutions Lithium-ion Batteries for Shipment
Status
Charger Powers On
Battery Insertion
Battery Discharging
Rapid Charging
Complete Charging
Ready to Ship
Fault
• Battery Faulted
• Motorola Solutions
battery is Nickel
• Battery is Unknown
Standby
• Battery is waiting to
rapid charge
• Battery may be too
hot, too cold, or low
voltage
• Charger may be too
hot

Optional equipment

A wall mount bracket (Part Number BR000271A01) is available for the Multi-Unit Charger
(MUC). Contact your local dealer to order this item. Installation of the wall mount bracket is
as follows:
• This wall mount bracket should be installed by a trained and experienced
technician. Having the product installed by a non-specialized technician is
! !
very dangerous, and can cause damage or injury.
• Do not install the product where the weight cannot be supported. If the
strength of the location where the wall mount is installed is not strong
W A R N I N G
enough, it can fall off and cause an injury.
• Do not install on a structure that is prone to vibration, movement, or
chance of impact.
Charger Display
IMPRES 2
MAINTENANCE CHGR
MOTOROLA SOLUTNS
BATTERY
SHIP LI DISCHRGE Steady Amber
SHIP LI CHARGE
xx% Rated Cap
LI READY TO SHIP
xx% Rated Cap
Warning:
NOT CHARGEABLE
REMOVE& REINSERT
or
WRONG BATT TYPE
CANNOT SHIP LI
Warning:
HOT BATTERY
WAITING TO CHRGE
or
COLD BATTERY
WAITING TO CHRGE
or
VERY LOW BATTERY
WAITING TO CHRGE
LED Indication
Green for approximately 1 second
Steady Amber
Steady Red
Steady Green
Flashing Red
Flashing Amber
9