Optional Equipment - Motorola PMPN4095A Kurzanleitung

1. Place the Multi-Unit charger on a flat surface.
2. Firmly insert the power supply into the charger DC Inlet Socket at the back of the
charger.
3. Plug the power supply power cord into a matching power outlet.
4. Insert the radio with attached battery into an available pocket.
5. When the radio with attached battery is properly seated in the pocket, charging status will
be indicated by the radio display indicator and the LED charging indicator on the radio.
6. The radio with attached battery is ready for use when the radio display indicates
Fully Charged and the LED charging indicator shows Green.
Note: Grip the radio body when inserting or removing the radio from the charger.
Avoid pulling the radio antenna when removing the radio.
The complete online user guide is available at https://businessonline.motorolasolutions.com.

OPTIONAL EQUIPMENT

A wall mount bracket (Part Number: BR000270A01) is available for the Multi-Unit Charger.
Contact your local dealer to order this item. Installation is shown below.
• This wall mount bracket should be installed by a trained and experienced
technician. Having the product installed by a non specialized technician is
very dangerous, and can cause damage or injury.
• Do not install the product where the weight cannot be supported. If the
strength of the location where the wall mount is installed is not strong
enough, it can fall off and cause an injury.
• Do not install on a structure that is prone to vibration, movement, or
chance of impact.
4