FoodSaver FFS006X Bedienungsanleitung Seite 7

FoodSaver Canisters
™
FoodSaver canisters are simple to use and ideal for
™
vacuum packaging delicate items such as muffins
and other baked goods, liquids and dry goods.
FoodSaver Fresh Zipper Bags
™
FoodSaver Zipper Bags feature special channels
™
that enable the efficient removal of air. The multi-
ply construction makes them an especially effective
barrier to oxygen and moisture.
FoodSaver Fresh Containers
™
FoodSaver Fresh Containers are simple to use and
™
ideal for vacuum packaging delicate items such as
muffins and other baked goods, liquids and dry
goods.
FoodSaver Bottle Stopper
™
Use FoodSaver bottle stoppers to vacuum package
™
wine, non-carbonated liquids and oils. This will
extend the life of the liquid and preserve the flavour.
Don't use the bottle stopper on plastic bottles.
FoodSaver Quick Marinator
™
The quick marinator infuses food with flavour in
minutes instead of hours using vacuum power to
penetrate marinades deep into the food.
Ordering
To order FoodSaver
™
please visit www.foodsaver.co.uk.
Parts
Referrring to Fig. 1:
Control panel
A
Vacuum view window
B
Vacuum channel
C
Latch
D
Roll cutter
E
Roll dispenser
F
Lower seal and cut bar
G
Vacuum and seal bar
H
Upper gasket
I
Removable drip tray
J
Lower gasket
K
Sealing strips
L
Roll storage area
M
bags, rolls and accessories
Power button
N
Power light
O
Seal button
P
Food Type button
Q
Dry Food light
R
Moist Food light
S
Accessory button
T
Retractable
U
handheld sealer
Marinate button
V
Cancel button
W
Pulse button
X
Seal light
Y
Vacuum light
Z
Making a bag from a
FoodSaver
You can make your own custom sized bags from a
FoodSaver
1. Plug your food preservation system into the
mains supply socket and press the Power button
(the power light comes on).
N
2. Move the latch
( ). If you haven't already done so, open the
lower seal and cut bar
and insert the FoodSaver
area
M
indicator line.
Note: The visible FoodSaver
see how much bag material you have left, so you
can quickly see when you will need to replace a
roll or purchase more.
3. Push the lower seal and cut bar back into the
appliance until it stops. Move the latch to the
seal position (
seal. The seal light pulses while the seal is being
made. When the seal light goes out the end of
the roll will now have been sealed.
4. Move the latch to the unlock position ( ). Pull
the roll out of the dispenser
length for the item being packaged. Add an
extra 75mm to allow the bag to be sealed then
slide the roll cutter
Tip: Each time you move the latch to the seal
position you create the seal for your next bag,
making continuous bag making a simpler
process.
You can then start to use your food preservation
system (refer to 'Using your Food Preservation
System').
www.foodsavereurope.com
Roll
™
roll. Referring to Fig. 2:
™
to the unlock position
D
by pulling it forward
G
roll into the storage
™
. Pull the roll end out until it reaches the
™
) to automatically create the first
F
across to cut the roll.
E
roll allows you to
to the required
7