Controls; Igniting And Adjusting; Flame Failure Device - Pelgrim GK210 Anleitung

3 Controls

3.1 Igniting and adjusting

The burners can be adjusted continuously between the high
and low positions.

3.2 Flame failure device

Your gas hob has a flame failure device. This ensures that the gas supply is shut off if the
flame goes out during cooking.
Operating the thermal flame failure device
Press the control knob in and turn it anti-clockwise. Hold the control knob pressed in for
approximately 5 seconds after the burner has ignited.
The flame failure device switches on.
68
4
2
3
1. 0-setting
2. Burner indication
3. Low setting
4. High setting
1