AUDIOLINE DECT 8848 Bedienungsanleitung Seite 36

Answering Machine
Taking a call being recorded
When the answering machine is already answering a call, you can take it
personally at any time. Recording of the message is automatically stopped
in this case.
è or ƒ
Selecting the answering mode
The answering machine is provided with two, pre−recorded outgoing
messages. After outgoing message 1 (OGM 1) has been played, the caller
can leave a message. Outgoing message 2 (OGM 2), on the other hand,
is purely an answer only announcement after which no message can be
left. When the answering machine's memory is full, OGM 2 is automati-
cally played. Both outgoing messages can be replaced by those of your
own.
2 sec. @
w
v
Recording, controlling and deleting outgoing message
Your answering machine is provided with two pre−recorded outgoing
messages . Select answering mode.
Both outgoing messages can be replaced by ones of your own or the pre−
recorded, default messages restored.
Recording outgoing messages
An outgoing message must be at least 3 seconds long and a maximum of
3 minutes.
Please note: The longer the outgoing message, the less record-
ing time is available for incoming messages!
@
Press and hold w or v
To record outgoing message 1, press w.
To record outgoing message 2, press v.
36
Downloaded from www.Manualslib.com
41
Take the call
42
Activate programming mode
Activate outgoing message 1 (with
recording)
Activate outgoing message 2 (without
recording)
Activate outgoing message mode.
Wait for the outgoing message.
Start OGM recording mode
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
manuals search engine
{ì} ð
Release w or v
Controlling the current outgoing message
@
s
Deleting self−recorded OGM and restoring default OGM
After deleting your own outgoing message, the pre−recorded message is
automatically reactivated.
@
–
Playing and deleting recorded messages
The message indicator flashes when messages have been recorded.
Playing messages
43
The recorded messages are played back in the sequence they were re-
corded. The weekday and time of recording are announced with each
message.
2 sec. q
q
Speak your message after the acoustic
signal.
End recording mode.
The new outgoing message is played
back.
Play the outgoing message
Stop playback
Play the outgoing message
Start the deleting process / Activate the
default outgoing message
44
45
Play all the messages
Play the new messages
If you want to interrupt playback briefly (pause) press the q
button during playback. An acoustic signal is then issued every
10 seconds.
To resume playback, press q again.