GeoMax ZEL400HV Gebrauchsanweisung Seite 16

Using recharge-
able batteries
Basic Operation
If your ZEL400HV is equipped with an optional rechargeable battery, you must
recharge it for 8 hours before first use.
1. Insert the re-charger plug into the jack located on the battery pack (10).
2. Plug the charger into an electrical outlet (110 volts or 220 volts).
3. Charge for 8 hours.
Later recharges
The ZEL400HV can be charged while working. If electricity is available on the
job site, simply plug in the charger and keep on working. You can also remove
the battery pack to charge it, and replace with the alkaline battery compart-
ment to keep on working.
ZEL400HV | 14