Basic Operation; Auto/Man Key - GeoMax ZEL400HV Gebrauchsanweisung

Basic Operation

ZEL400HV | 8
2 Basic Operation
An overview of laser and keypad functions can be found on page 7.
The laser performs a self-test when switched on. The beam blinks while the
laser is self-levelling. After the laser is leveled, the head will start to rotate.

2.1 Auto/Man Key

Auto: Automatic levelling - the default mode when the laser is switched on.
Man: Manual use.
The ZEL400HV laser is always in the automatic self-levelling mode (Auto) when
switched on. Once the instrument has self-levelled, the laser head will start to
rotate.
You can choose to have constant rotation by using the manual mode. This way,
the beam will rotate even if the instrument is not leveled (necessary when
working on inclined planes).
For safety, a red light will blink above the Auto/Man button to advise the user
that the laser is in manual mode.