EN
SERVICE INSTRUCTIONS
Cyclic change of the activated carbon fine dust filter
As cleaning is not possible, it should be replaced after 120-200 operating hours or in four-
month cycles. There is a need for premature replacement if the cleaning performance of
the filter decreases ( noticeable by the fact that the extractor hood no longer provides the
full extraction performance, or the room air quality is no longer acceptable ) .
Remove the activated carbon filter (11) as illustrated and dispose of in accordance with lo-
cal regulations.No regeneration possible !
Insert filter
Push cleaned grease filters and activated carbon filters completely into the
filter cassette (9) up to the stop.
Insert the filter cassette in the filter trough.
Cleaning air outlet strips
To clean, push backward and lift - clean - then reinsert - push forward until you feel it snap-
ping in.
Attention: Do not clean in the dishwasher !
73