,SETUP – CUSTOMIZE –
By pressing the UP/DOWN-button you can change the setting of display backlight. To save the changes
please press the ENTER-button.
You can leave this mode at any time without saving changes by pressing the ESC button.
ALWAYS ON: Display backlight is always on
1sec – 10 min: In this mode you can set a time. After last using of buttons and expiration of setted time the
display backlight will be switched off. After pressing of any button the display backlight will
back go on. Time scale below 1 minute can be adjusted is seconds, above 1 minute in
minutes.
,SETUP – CUSTOMIZE – FACTORY
Here you can restore the factory default settings. Press the ENTER button to restore the factory settings.
MBN GmbH, Balthasar-Schaller-Str. 3,
DISPLAY,
DEFAULT,
86316 Friedberg - Germany
www.proled.com
Bedienungsanleitung / Users manual
56