PROLED mini PRO CONTROLLER 5G 1-10V CA Bedienungsanleitung Seite 45

To delete a paired RF remote control you must first choose it with UP/Down buttons. As soon as it's
displayed in the display, please press and hold UP- and DOWN-button. After around 2-3 seconds the paired
remote control is deleted.
Select main mode:
With the UP-DOWN buttons the main mode is selected. On the right side a menu with the main menu items
is displayed. By pressing the UP-DOWN buttons you can select the menu items. When the item is
highlighted, the function can be activated by pressing the ENTER button. When you press the ESC button or
if no button is pressed for 10 seconds, the device will revert to the previously selected main mode.
，INPUT CONTROL MODE – CAS
The device works in CASAMBI mode, if the CASAMBI module is installed.
All further settings are made directly in the CASAMBI-App. If you have any problems with the CASAMBI-App,
you will get helped on CASAMBI-Homepage
，MAIN MODE – DMX
Only in DMX mode
The three large numbers indicate the DMX address.
As long as the digits are flashing, no DMX signal is received. When the display stops flashing, a DMX signal
is present.
DMX address setting:
Press the ENTER button.
With the UP-DOWN buttons you can now select the address from 1-508. By pressing the ENTER
button once more, the slave addresses of the slave devices can be selected faster and easier. The
MBN GmbH, Balthasar-Schaller-Str. 3,
AMBI，
www.casambi.com
ADDRESSES，
www.proled.com
Bedienungsanleitung / Users manual
86316 Friedberg - Germany 45