PROLED mini PRO CONTROLLER 5G 1-10V CA Bedienungsanleitung Seite 42

，INPUT CONTROL MODE –
The device works in DALI mode, if the DALI module is installed.
See page 36.
With the UP-DOWN buttons the Setup-menu can be entered
SETUP –
Access to the setup menu items
DALI –
Channel control via DALI commands, auto addressing via DALI commands, or manual DALI
addressing
DALI addresses setting:
Press the ENTER button.
The first channel number starts to blink. With the UP-DOWN buttons you can now select the address
from 1-64. By pressing the ENTER button, the next channel number starts to blink. For every
channels should be set different channel number, other way the DALI system will not work correctly.
Press the ESC button to save the changes.
MANUAL –
Desired colour can be adjusted manually with the buttons
SINGLE –
Standalone programs can be selected
Select main mode:
With the UP-DOWN buttons the main mode is selected. On the right side a menu with the main menu items
is displayed. By pressing the UP-DOWN buttons you can select the menu items. When the item is
highlighted, the function can be activated by pressing the ENTER button. When you press the ESC button or
if no button is pressed for 10 seconds, the device will revert to the previously selected main mode.
MBN GmbH, Balthasar-Schaller-Str. 3,
Bedienungsanleitung / Users manual
DALI，
86316 Friedberg - Germany
www.proled.com
42