PROLED mini PRO CONTROLLER 5G 1-10V CA Bedienungsanleitung Seite 43

，INPUT CONTROL MODE – RF /
The device works in RF, if the RF module is installed. It is also possible to control the dimmer with W-DMX
signal. The function must be enabled in the menu.
The display shows, that no RF remote controller is paired.
With the UP-DOWN buttons the Setup-menu can be entered
SETUP –
Access to the setup items.
RC –
Choosing between RF remote control or W-DMX as signal input.
MANUAL –
Desired colour can be adjusted manually with the buttons.
SINGLE –
Standalone programs can be selected.
Following are the possible RF remote controller listed:
RF MONO REMOTE PUSH BUTTON
RF MONO REMOTE CONTROLLER STYLE
RF DW REMOTE CONTROLLER
RF MONO REMOTE CONTROLLER
RF RGBW1 REMOTE CONTROLLER
MBN GmbH, Balthasar-Schaller-Str. 3,
Bedienungsanleitung / Users manual
W-DMX，
Controls all 4 channels at same time
One zone controls one channel
One zone controls 2 channels. It is possible to realize 2
zones with one mini PRO Controller.
If during pairing button for zone 1 or 2 will be pressed, than,
zone 1 controls always channel 1 and 2. Zone 2 controls
always channel 3 and 4. If during pairing button for zone 3 or
4 will be pressed, than, zone 3 controls always channel 1
and 2. Zone 4 controls always channel 3 and 4. With one RF
DW remote control it is possible to control two mini PRO
Controller.
One zone controls one channel
One zone controls all 4 channels. At pairing the desired
zone must be pressed.
86316 Friedberg - Germany
www.proled.com
43