,SWITCHING
ON,
When the device is connected to mains supply, the dimmer is ready for operation.
During initialization the PROLED Logo is displayed for a short time.
After 3 seconds the display proceeds automatically. The controller is now in one of the five main modes.
DISPLAY
The display is divided in three parts:
LEFT:
data of the current mode are shown
MIDDLE:
bar graph for the outputs
RIGHT:
generic information of the device
Generic Information
Top right of display:
OVERHEAT –
12V/24V - CA/CC – 80 Hz-60.000 Hz
MBN GmbH, Balthasar-Schaller-Str. 3,
Bedienungsanleitung / Users manual
The device is above the rated maximum temperature
Correct function
86316 Friedberg - Germany
www.proled.com
39