PROLED mini PRO CONTROLLER 5G 1-10V CA Bedienungsanleitung Seite 47

，MAIN MODE –
Only in DMX mode
Function same as menu MANUAL, but additionally a DMX signal will be issued.
，MAIN MODE –
Here various standalone programs can be selected.
On the display you can see the current program number, maximum number of steps and the current step
number. "S" and "W" are meaning SPEED time (speed of colour change) and WAIT time (delay between
steps). The SPEED time indicates the changing speed from one step to the next one. The WAIT time
indicates the delay time, until the change to the next step is performed. During the WAIT time the original
channel values remain unchanged.
By pressing the ENTER button several parameters can be selected: program number, SPEED time, WAIT
time and the MASTER-brightness. The selected parameter is inverted and can be modified with the UP-
DOWN buttons.
You can leave this mode at any time without saving changes by pressing the ESC button.
，MAIN MODE –
Here you can adjust additional parameters. Please choose with the UP-button SETUP and press ENTER.
MBN GmbH, Balthasar-Schaller-Str. 3,
MANUAL，
SINGLE，
SETUP，
www.proled.com
Bedienungsanleitung / Users manual
86316 Friedberg - Germany 47