PROLED mini PRO CONTROLLER 5G 1-10V CA Bedienungsanleitung Seite 40

Right middle display:
Current temperature of the device
Lower right display:
Various icons:
OK –
，INPUT CONTROL MODES
The device can work with different type of input signals: DMX-512/RDM, 0/1-10V, DALI, RF and CASAMBI.
The input control mode depends on the installed module.
See page 34 till 37.
，INPUT CONTROL MODE –
The device works in DMX mode, if the DMX module is installed. DMX address flashes, when no DMX-signal
is existing.
For connection of DMX-controller please see page 37.
With the UP-DOWN buttons the Setup-menu can be entered.
MBN GmbH, Balthasar-Schaller-Str. 3,
All parameters within correct values
，
DMX，
www.proled.com
Bedienungsanleitung / Users manual
86316 Friedberg - Germany 40