Tecsis P3290 Betriebsanleitung Seite 36

8. Communication Software
5. To activate the connected instrument, the instrument selection dialog must be
started. This is done via the „Instruments" toolbar or the „Instruments" button and
„Add" corresponding USB port.
6. Press „Connect" button.
Note: The instrument selection dialog allows several instruments to be connected and assigned
simultaneously to spare USB ports (COM ports).
On the right-hand side of the screen, the important „information" of the connected pressure
sensor is listed. The current pressure and temperature values are displayed.
36 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Downloaded from www.Manualslib.com manuals search engine
GB