Tecsis P3290 Betriebsanleitung Seite 33

7. Starting, operation
Specifications
Wiring protection
Short-circuit proofness

Reverse polarity protection

Weight
{ } Items in curved brackets are optional extras for additional price.
When designing your plant, take into account that the stated values (e.g.burst pressure,
over pressure safety) apply depending on the material, thread and sealing element used.
Functional test
The output signal must be proportional to the pressure. If not, this might point to a
damage of the diaphragm. In that case refer to chapter 10 „Troubleshooting".


Warning

Caution
Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Downloaded from www.Manualslib.com
Model P3290, P3291
kg
Open pressure connections only after the system is without pressure!
Observe the ambient and working conditions outlined in section 7
„Technical data".
Please make sure that the pressure sensor is only used within the overload
threshold limit at all times!
When touching the pressure sensor, keep in mind that the surfaces of the
instrument components might get hot during operation.
manuals search engine
S+ towards U-
U+ towards U-
Approx. 0.3
GB
33