Tecsis P3290 Betriebsanleitung Seite 27

7. Starting, operation
Mechanical connection
max.
10 Nm
Sealing
Remove the protection cap by hand only just before installation and absolutely avoid

any damage to the diaphragm during installation as well (P3291).
For Model P3290 you have to provide for a sealing element; exceptions are instruments

with self-sealing threads (e.g. NPT thread). For Model P3291 the sealing is included in
delivery.
When mounting the instrument, ensure that the sealing faces of the instrument and

the measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the

prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (form/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
When screwing the transmitter in, ensure that the threads are not jammed.

Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Downloaded from www.Manualslib.com manuals search engine
Product label (example)
P # Product No.
Signal
Coded manufacture date
Power Supply
S # Serial No.
Pin assignment
GB
27