Specifications - Makita HP347D Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Speed change lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model HP347D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model HP457D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Downloaded from www.Manualslib.com
Explanation of general view
5-1. Adjusting ring
5-2. Action mode changing ring
5-3. Graduation
5-4. Arrow
6-1. Adjusting ring
6-2. Action mode changing ring
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
North/South America
Other countries
Net weight
Rated voltage
) : 82 dB(A)
pA
) : 93 dB(A)
WA
) : 81 dB(A)
pA
) : 92 dB(A)
WA
Wear ear protection
manuals search engine
HP347D
10 mm
10 mm
25 mm
5,1 mm x 63 mm
216 mm
1.5 kg
D.C. 14.4 V
ENE039-1
Vibration
The vibration
determined according to EN60745:
Model HP347D
ENG905-1
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HP457D
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
3
6-3. Graduation
6-4. Arrow
7-1. Sleeve
8-1. Blow-out bulb
HP457D
13 mm
13 mm
36 mm
6 mm x 75 mm
6 mm
0- 1,400
0 - 400
0 - 21,000
0 - 6,000
246 mm
239 mm
1.7 kg
D.C. 18 V
total value (tri-axial vector
2
) : 9.0 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
2
) : 7.0 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
ENG900-1
sum)
ENG901-1