Siemens SITRANS L 260 Handbuch Seite 14

a)
b)
c)
d)
e)
Key
Page EN-12
Downloaded from www.Manualslib.com
Changing a numeric value:
Navigate to the desired parameter.
Press Right ARROW
view. The current value is displayed.
Press Right ARROW
mode. The current value is highlighted.
Key in a new value.
Press Right ARROW
returns to parameter view and displays the new
selection.
Name
UP or
DOWN
arrow
RIGHT
arrow
LEFT arrow
Clear
Decimal
point
Plus or
minus sign
to Numeral
SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
manuals search engine
to open parameter
again to open Edit
to accept it. The LCD
Key Function in Edit mode
Selecting options Scrolls to item.
- Increments or decrements digits
Numeric editing
- Toggles plus and minus sign
- Accepts the data (writes the parameter)
Selecting options
- Changes from Edit to Navigation mode
- Moves cursor one space to the right
Numeric editing - or with cursor on Enter sign, accepts the data
and changes from Edit to Navigation mode
Cancels Edit mode without changing the parame-
Selecting options
ter
- Moves cursor to plus/minus sign if this is the first
key pressed
Numeric editing
- or moves cursor one space to the left.
- or with cursor on Cancel arrow, cancels the entry
Numeric editing Erases the display.
Numeric editing Enters a decimal point.
Numeric editing Changes the sign of the entered value.
Numeric editing Enters the corresponding character.
parameter name
parameter
number
current
value
A5E32114443