Parameter Menus - Siemens SITRANS L 260 Handbuch

Handheld Programmer
(Ordered separately:
Part No. 7ML1930-2AJ)
C
Accessing parameters via the handheld programmer
Note
inactivity in PROGRAM mode (between 15 seconds and 30 minutes, depending on the menu
level).

Parameter menus

Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure. For the complete list of parameters with instructions, see the full manual.
Note:
ARROW keys move to the
next menu item in the
direction of the arrow.
Page EN-10
Downloaded from www.Manualslib.com
Key
: SITRANS LR260 automatically returns to Measurement mode after a period of
In Navigation mode
SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
manuals search engine
Measurement
Result
Mode Function
Updates internal
New value is displayed in LCD
enclosure temper-
secondary region.
ature reading.
Updates echo New value is displayed in LCD
confidence value. secondary region.
Updates distance New value is displayed in LCD
measurement. secondary region.
–at the menu level last displayed
in this power cycle.
Mode opens – at top level menu if power has
PROGRAM mode– been cycled since exiting PRO-
GRAM mode, or more than 30 min-
utes have elapsed.
Right ARROW
opens PROGRAM –at top level menu.
mode–
Up or Down
ARROW LCD displays measured value in
toggles between either linear units or percent.
linear units and %
1. QUICK START
2. SETUP
2.1. DEVICE
2.2. INPUT
2.2.1. SENSOR CALIB.
2.2.1. ECHO PROC.
A5E32114443