Instructions For Cleaning And Care; Viewing Window For Scanner And Proximity Sensor; Button; Miscellaneous - ACD GRUPPE Hasci Set Kurzübersicht

21 Instructions for Cleaning and Care

Clean the backhand scanner by setting it down on a surface (e.g. table). This way, you can hold it securely
and the backhand scanner cannot slip out of your hands during the cleaning process.
ATTENTION

21.1 Viewing window for scanner and proximity sensor

In case of abnormalities during scanning, turn the backhand scanner off and clean the scanner pane with a
soft, dry cloth. The scanner pane is very transparent and barely visible to the naked eye. Do not put a lot of
pressure on the glass.

21.2 Button

To clean the button, always switch off the backhand scanner, as the button reacts to touch and may cause
malfunctions. Do not put a lot of pressure on the button.

22 Miscellaneous

EU Directive on the Disposal of Waste Electrical and
Electronic Equipment (WEEE)
All components must be returned to ACD Elektronik GmbH
at the end of their service life for recycling.
WEEE: 53473276

23 Support

If you need additional assistance, please contact our support hotline:
///ACD Elektronik GmbH
Engelberg 2
88480 Achstetten, Germany
Tel.: +49 7392 708-488
E-mail: support.technik@acd-elektronik.de
Web: www.acd-gruppe.de
The support hotline is available for you Monday to Thursday from 8:00 am to 5:00 pm and
Friday from 8:00 am to 3:00 pm.

24 EU Declaration of Conformity

ACD Elektronik GmbH hereby declares that the radio system type Hasci complies with
directive 2014/53/EU. The complete text of the EU Declaration of Conformity is
available in the customer portal at the following internet address:
https://www.acd-gruppe.de/download-area/
Hasci_Set_Kurzübersicht_Brief Overview_V1.00_de_en
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents for cleaning.
27 / 27