Inserting The Backhand Scanner In And Removing It From The Docking Station; Docking Station; Power Supply; Interfaces - ACD GRUPPE Hasci Set Kurzübersicht

17.6 Inserting the backhand scanner in and removing it from the docking station

To insert the backhand scanner in the docking station, insert it vertically downward. To remove the backhand
scanner from the docking station, pull it vertically upward out of the docking station.
Fig. 1: Inserting the backhand scanner in and removing it from the docking station

17.7 Docking station

17.7.1 Power supply

The backhand scanner may only be charged in the DSHasci docking station with the appropriate power
supply unit.

External power supply for DSHasci
o Input voltage
o Output voltage
 Power cable (country-specific)

17.7.2 Interfaces

The interfaces of the DSHasci docking station are described below. They are mounted on the side.
Fig. 2: Interfaces of the DSHasci
 Insert the DC connector of the power supply in the DC socket for the supply voltage.
Hasci_Set_Kurzübersicht_Brief Overview_V1.00_de_en
~
100 – 240 V AC; 1.0 A max.; 50 – 60 Hz
15 V DC; 2.4 A
20 / 27