Standard Configurations; Reset To Default Values; Proximity Sensor Distances - ACD GRUPPE Hasci Set Kurzübersicht

2) A conversion from the suspend time in seconds to the system variable is required here using the
following formula (for the operation, round up a number with one decimal place to the next higher natural
number):
INPUT PARAMETER = ROUND UP( (SUSPEND TIME-1) / 15 )
The input parameter must be inserted in hexadecimal.
The maximum suspend time is 3792 seconds (= approx. 63 minutes)

19.2 Standard configurations

The following sections present sample codes for changing system parameters to common values:

19.2.1 Reset to default values

Factory settings
)]{FEFEFEFEFEFEFEFE00
After resetting to factory settings, the backhand scanner must be manually switched off and on again.

19.2.2 Proximity sensor distances

Default (approx. 30 cm)
)]{00400003FEFEFEFEFE
approx. 10 cm
)]{00400010FEFEFEFEFE
approx. 30 cm
)]{00400003FEFEFEFEFE
Hasci_Set_Kurzübersicht_Brief Overview_V1.00_de_en
Deactivated
)]{00000000FEFEFEFEFE
approx. 20 cm
)]{00400006FEFEFEFEFE
approx. 40 cm
)]{00400001FEFEFEFEFE
24 / 27