Troubleshooting - HP LaserJet Pro M129 Handbuch Für Die Inbetriebnahme

10. Use the scan feature
Use the HP Scan software on your computer to start a scan job at the printer.
Windows
Open HP Printer Assistant, select Scan, and then select Scan a Document or Photo.

Troubleshooting

User guide
The user guide includes printer usage and troubleshooting information. It is available
on the printer CD and on the web:
1. Go to: www.hp.com/support/ljM129MFP
2. Select the appropriate language, and then select the printer if prompted to, and
then click User Guides.
Check for firmware updates
1. Go to: www.hp.com/support/ljM129MFP
2. Select a printer or category from the list, and then click Drivers.
3. Select the operating system, and click the Next button.
4. Select Firmware, and click the Download button.
Control panel help (touchscreen models only)
Touch the Help button on the printer control panel to access help topics.
Wired (Ethernet) network connection (optional)
• Verify that the printer is attached to the correct network port using a cable of the
correct length.
• Verify that the lights next to the network port are lit.
• Verify that the print driver is installed on the computer.
• Test the network connection by pinging the network:
Windows
Click Start > Run. Type cmd, and press E
printer IP address, and then press E
the printer IP, see "Find the printer IP address."
OS X
Open the Network Utility, and type the IP address in the ping pane. Press E
Example IP address: 192.168.0.1. To find the printer IP, see "Find the printer
IP address."
• If the window displays round-trip times, the network is working.
• If the ping does not work, try restarting the printer and recheck all of the
connection steps.
Fax troubleshooting (fn, fp, and fw models only)
Verify the physical connection
• Verify that the phone cord is connected to the fax
printer and to the wall jack.
• For an extension phone or other additional device, verify the phone cord is
connected to the telephone
• If outgoing phone calls fail because no dial tone is detected or the line is busy,
connect to a different phone line.
• For Fax over IP service, reduce the Fax Speed, and turn off Error Correction
Mode from the Fax Settings menu on the printer control panel.
. Type ping, type a space, type the
nter
. Example IP address: 192.168.0.1. To find
nter
port on the back of the
port on the back of the printer and to the device.
OS X
Click Applications, select HP, and then select HP Easy Scan.
Resolve error code messages
Lights Status
The Attention Light
is blinking
Additional support resources
For HP's all-inclusive help for the printer, go to:
www.hp.com/support/ljM129MFP
• Solve problems
• Find advanced configuration instructions
• Download software updates
• Join support forums
• Find warranty and regulatory information
• Access mobile printing resources
Wireless network connection (wireless models)
• Verify that the network cable is not connected. The printer cannot connect to
a wireless network when a network cable is connected.
• Verify that the printer and wireless router are turned on and have power.
Also make sure the wireless switch is turned on.
• Verify that the printer is within the range of the wireless network. For most
networks, the printer must be within 30 m (100 ft) of the wireless access point
(wireless router).
• Verify that the print driver is installed on the computer.
• Verify that the computer and printer connect to the same wireless network.
.
• For Mac, verify that the wireless router supports Bonjour.
nter
• Restart the wireless router.
Verify the printer fax settings
• To use a voice-mail service from the phone company or service provider, make
sure that the printer Rings to Answer setting is set to be fewer rings than the
telephone answering machine.
• If multiple phone numbers are assigned to the same physical phone line and
the line is shared by multiple devices, make sure that the printer is set to the
correct distinctive ring setting. Use a setting in which the printer answers faxes
and ignores other ring types.
• Configuring the Fax Speed setting to Medium (V.17) or Slow (V.29) can also
improve your ability to send a fax.
4
Error code Action
Er/01 Load the paper into the tray