Operation; Tools, Measurement- And Test-Equipment; Changing Stylus - m&h IRP60.00 Betriebsanleitung

Operation

2.2 Operation
2.2.1

Tools, Measurement- and Test-Equipment

Order No. Description
0885 Mounting pin
1097 Hexagon key AF2 mm
5940 Hexagon key AF4 mm
3079 Dial gauge
2.2.2

Changing Stylus

1. Unscrew the stylus from the Touch Probe using the mounting pin.
2. Carefully screw the new stylus into the Touch Probe (Fig. 5).
3. Align the stylus to spindle center (refer to chapter 2.2.5).
4. Calibrate the Touch Probe.
Stylus change
48
Illustration
m&h Infrared Touch Probe
IRP60.00
Stylus
IRP60.00
Mounting pin
(0885)
M=2 Nm
(1.47 lbf.ft)