Removing The Infant Carrier; Removing The Adapters - KIDDY Click'n Move Bedienungsanleitung

The infant carrier may be inserted facing forwards or back-
wards.
Insert both child seat adapters into the travel system until they
snap in place.
Check to make sure that the adapter locks are open (levers are
in the position indicated in red).

8.2 Removing the infant carrier

To be able to remove the seat, press down on both levers on the adapters
(red position). Now you can pick up the infant carrier.

8.3 Removing the adapters

Press the button on the inner side of the adapter, and pull the adapters up
out of the frame.
Make certain that your child is
properly secured in the infant
carrier and that the brake is
engaged!
Now you can insert the infant carrier.
Lock the seat in place by pressing down.
Always check to see that the adapters in the
child seat are locked by observing that the
levers on both adapters are now in the upper
position (indicated in yellow).
19
ENG