Instructions For Use; Opening The Stroller Ready For Assembly; Assembling The Handles; Assembling The Front Wheels - CYBEX TWINYX Bedienungsanleitung

III. INSTRUCTIONS fOR USE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM
FOR FUTURE REFERENCE. YOUR CHILDREN'S SAFETY MAY BE AFFECTED IF YOU DO
NOT FOLLOW THESE INSTRUCTIONS.
!
CYbEx TwINYx
ASSEMbLY INSTRUCTION
DELIvERY STATUS

1. OPENING THE STROLLER READY fOR ASSEMbLY

a)
Release both (left & right) fold lock
levers.
b)
Open the stroller.
c)
Push down on both pedals (left & right)
of the primary lock lever until the locking
system is engaged.locking system is
engaged.
28
2x
2x 6x 1x
1x

2. ASSEMbLING THE HANDLES

a)
With the locking pins facing you slide the
handle into recepticle.
Push in the locking pins and push handle
in until it makes an audible „CLICK".
Attention:
The pins on both sides must be fully
engaged.

3. ASSEMbLING THE fRONT wHEELS

a)
Fit the front wheels to the end of the frame
until they engage with a "click".

4. ASSEMbLING THE REAR wHEELS

a)
Attention:
The Wheel system with the brake pedal
must be fitted to the right side of the
buggy (viewed from behind the buggy).
Attention:
The pins on both sides of the wheel
system must be fully engaged.. Ensure
the bowden cable is inserted into the
clips.
29