Fitting The Uvc Clarifier; Installation In Filter System Proficlear Premium Xl Gravitation; Combinations Of Uvc Clarifier / Filter Pump - Oase Bitron Premium 60 W Gebrauchsanleitung

- EN -
4.4.2

Fitting the UVC clarifier

How to proceed:
 F
1. Open the hose clip of pipe collar DN 110 and push the pipe collar onto the outlet of the UVC clarifi-
er.
2. Position the UVC clarifier in the container and connect the outlet with the outlet of the container
using the pipe collar. Tighten the pipe collar.
3. Use fastening brackets to fasten the UVC clarifier on the container.
– The fastening brackets are fastened on the UVC clarifier and on the container wall.
– If they do not already exist, make the required holes in the container wall.
4. Connect the outlet of the pump with the inlet of the UVC clarifier.
– Assembly material: (→ Combinations of UVC clarifier / filter pump)
5. Insert screen baskets and fasten the connection cables with a clip.
6. Attach the switch box on the screws on the outer container wall. (→ Installing the switch box)
– For containers without attachment fixtures, make the required holes and screw in the screws
from the accessories kit as an attachment fixture.
4.5

Installation in filter system ProfiClear Premium XL Gravitation

In the filter system ProfiClear Premium XL Gravitation, the Bitron Premium 60 W / 120 W / 180 W is
installed in the ProfiClear Premium XL gravitation drain module.
4.5.1

Combinations of UVC clarifier / filter pump

Bitron AquaMax Eco
Premium
60 W
Gravity 10000/
15000/20000
Premium 6000/8000/
10000/12000/16000/
20000
Titanium 31000
Titanium 51000
Expert 21000/26000/
36000/44000
120 W Gravity 10000/15000/
20000
Premium 8000/10000/
12000/ 16000/20000
Titanium 31000
Titanium 51000
Eco Expert
21000/26000/
36000/44000
180 W Gravity 10000/15000/
20000
Premium
10000/12000/
16000/20000
Titanium 31000
Titanium 51000
Expert 21000/26000/
36000/44000
40
Assembly Installation diagram, see page 15
material
OASE acces-
sories, art. no.
Note
73752, 73758 a OASE accessories are supplied with the Bitron Premium
60 W.
73750, 73536, b Use the pump without filter shells but with the pump holder
73752 EC2 installed
OASE accessories 73752 are supplied with the Bitron
Premium 60 W.
48597, 2× 73750 Technically possible, combination not recommended, OASE
does not offer a sleeve for connecting the pump
2× 73750, 73658 Technically possible, combination not recommended, OASE
does not offer a sleeve for connecting the pump
2× 73750, 73752, c OASE accessories 73752 are supplied with the Bitron
73536 Premium 60 W.
73752, 73757, d
73758
73536, 73750, e Use the pump without filter shells but with the pump holder
73752, 73757 EC2 installed
48597, 2× 73750, f
73753
2× 73750, 73658, g
73754
73536, h
1×/2× 73750,
73752,
1×/2× 73757
73752, 73757, i
73758
73536, 73750, j Use the pump without filter shells but with the pump holder
73752, 73757 EC2 installed
48597, 2× 73750, k
73753
73658, 2× 73750, l
73754
73536, m
1×/2× 73750,
73752,
1×/2× 73757