Product Description; Assembling The Vacuum Cleaner - Oase BioCompact 50 Gebrauchsanleitung Und Garantie

Electrical connection
• Only connect the unit if the electrical
data of the unit and the power supply
coincide. The unit data is to be found on
the unit type plate, on the packaging or
in this manual.
• Protect the plug connections from mois-
ture.
• Only plug the unit into a correctly fitted
socket.
Symbols used in these instructions
N O T E
Indicates information intended to give the
user a better understanding.
Additional information
 A Reference to a figure, e.g. Fig. A.

PRODUCT DESCRIPTION

This filter serves to filter water in an aquarium
and maintain the water circulation. All filter
types are interior filters and are therefore in-
stalled submerged inside the aquarium.
Intended use
BioCompact 25/50, referred to in the following
as "unit", may only be used as specified in the
following:
•
Operation under observance of the technical
data.
The following restrictions apply to the unit:
•
Only use indoors and inside the aquarium.
•
Do not use for commercial or industrial pur-
poses.
•
Do not use in conjunction with chemicals,
foodstuff, easily flammable or explosive sub-
stances.
ASSEMBLING THE VACUUM
CLEANER
N O T E
Thoroughly rinse out all filter material
with warm tap water before using for the
first time in order to remove any soiling.
BioCompact 25
The supplied suction cups serve for fastening the
unit to a clean, smooth surface.
How to proceed:
 A
1. Remove the lid of the filter container.
2. Pull out the foam filter.
3. Pull off the motor housing.
- EN -
15